ASUS ProArt PA32UCG Monitor Review

With its “ProArt” series, ASUS has been targeting the creative field with all kinds of high-quality computer parts and accessories. Its monitor line-up is quite well-known by now, with everything from beginner-level IPS displays all the way to high-end monitors for color-accurate work. Ever since I reviewed the ASUS ProArt PA278QV, I have been curious about how well the high-end ASUS monitors measure up for serious post-processing needs, so when I found out that ASUS released its newest ProArt PA32UCG monitor, I wanted to give it a shot. With its $5K price tag, this monitor is by no means cheap, so let’s see what it has to offer, especially when compared to its competition.

ASUS ProArt PA32UCG Monitor

Before we dive into all the details about the monitor, let’s take a quick look at the key specifications.

Table of Contents

ASUS ProArt PA32UCG Specifications

Description Specification
Screen Size 32″
Resolution 3840×2160 (4K)
Pixel Pitch 0.1845mm
PPI 138
Aspect Ratio 16:9
Panel Type IPS (Mini-LED)
Color Depth 10-Bit
FRC No
Viewing Angle (Vertical / Horizontal) 178° / 178°
Response Time 5 ms (GTG)
Refresh Rate 120Hz
Color Gamut sRGB 100%, AdobeRGB 99.5%, DCI P3 98%, Rec.2020: 85%
Delta E <1
Presets Standard, sRGB, Adobe RGB, DCI-P3, Rec. 2020, DICOM, Rec. 709, HDR_PQ DCI, HDR_PQ Rec2020, HDR_HLG, HDR_HLG DCI, Dolby Vision, User Mode1, User Mode2
Uniformity Compensation Yes
HDR Yes
HDR Support HDR10, HLG, Dolby Vision
Brightness (HDR, Peak) 1,600 cd/㎡
Brightness (Typ.) 1,000 cd/㎡
Contrast Ratio (HDR, Max) 1,000,000:1
Contrast Ratio (Typ.) 1000:1
Gamma 1.8 – 2.6
HDCP 2.2
VRR Technology FreeSync™ Premium Pro
VESA Wall Mount 100x100mm
Display Screen Coating Matte / Anti-Glare
External Colorimeter Support Yes
Hardware Color Calibration Software ASUS ProArt
Factory Calibration Report Yes
Input Ports Thunderbolt 3 x 2, HDMI 2.1 x 1, HDMI 2.0 x 2, DisplayPort 1.4 DSC x 1
Other Ports Earphone Jack (3.5mm), 3x USB 3.1 Ports
Built-in Speakers Yes (3Wx2)
Power Consumption (On / Sleep) <55W / <0.5W
Dimensions (With Stand) H: 470mm ~ 600mm, W: 727mm, D: 240mm
Net Weight (Panel Only) 9.7 kg
Net Weight (With Stand) 14.64 kg
Tilt -5° / +23°
Swivel -60° / +60°
Pivot -90° / +90°
Height Adjustment 0-130mm
Manufacturer Warranty 3 Years
Price (MSRP) $4,999

As you can see, the specifications of the ASUS ProArt PA32UCG are pretty incredible. Although at 32 inches it is “only” a 4K monitor (compared to other 27″ 5K monitors out there), its 120 Hz refresh rate, uniformity compensation, wide gamut capabilities that cover 100% of sRGB, 99.5% of AdobeRGB and 98% of DCI P3 (with Delta E below 1), as well as insane brightness of 1,600 nits, makes it a high-end offering that competes with some of the best monitors on the market today. Naturally, one would compare this monitor to some of the best from EIZO and NEC.

Such large and feature-rich monitor is clearly a niche product that is aimed at professionals who would want to take advantage of its capabilities when editing images and video. Most photographers wouldn’t care about high refresh rates and the ability to display HDR content, but those who edit videos and want to preview their work certainly would. So if you edit a lot of video content, or you deal with both photos and videos and need a highly accurate and capable monitor, the ASUS ProArt PA32UCG is certainly a very appealing tool for the job.

Let’s take a closer look at what this monitor can do for you. First, we will look at what’s in the package and go over the setup, then we will see how accurate the monitor is out-of-the-box and how accurately you can calibrate it using the provided software.

Monitor Setup and Build Quality

Being a 32″ monitor, you know the box for the monitor is not going to be light or small. After I barely managed to bring it into my living room, my cats immediately took over and found the box to be nice and comfy to sit and lay on:

ASUS ProArt PA32UCG Monitor with Cats Enjoying it
Cats enjoying the huge ASUS ProArt PA32UCG box

I guess they sensed that this box has something special in it!

Once I got the top cover removed, I was greeted with a factory color calibration test report:

ASUS ProArt PA32UCG Monitor Factory Calibration Report
Factory Calibration Report

Those are pretty low bars across the board, something I have only previously seen on high-end NEC and EIZO monitors, so it was already a good start. The calibration report included graphs for sRGB, AdobeRGB, DCI-P3, as well as other types of tests.

Underneath the calibration report was the monitor hood and some pins to keep the hood in place. After I moved those out of the way, I noticed a few boxes underneath. One of the boxes that I recognized right away was for the i1Display Pro, which I have been using for many years to calibrate my monitors. Except this was a custom OEM version with the “ASUS ProArt” labeling:

ASUS ProArt PA32UCG Monitor i1Display Pro
i1Display Pro Bundled with the monitor

This is certainly a good sign, since the i1Display Pro is known to be a great tool for calibrating devices. Although my copy is more than 5 years old, it is still as good as new for calibrating all of my monitors for PCs and Macs. It also works very well with DisplayCAL, which is what I used for this review to evaluate the accuracy of the monitor.

The other larger box contained the monitor manual, as well as different cables to hook the monitor up. ASUS included the following cables: HDMI, DisplayPort, Thunderbolt 3, USB-C, USB-C-to-USB-A and power cable:

ASUS ProArt PA32UCG Monitor Accessories

A plastic cover plate is also provided in the box in order to conceal the cables and make the monitor look neater.

From there, the next step was to remove some of the styrofoam packaging, which revealed the monitor and the stand. When I pulled out the stand, I realized that it was one of the heaviest stands I’ve dealt with – at 5 kilos, this thing is a beast!

ASUS ProArt PA32UCG Monitor Stand
ASUS ProArt PA32UCG Monitor Stand

Obviously, a high-end 32″ monitor needs a very stable stand in order to ensure that it never wobbles. Kudos to ASUS engineers for making such a good stand – once you mount the monitor, it surely does a great job. The wide metal base (with a plastic-covered top) provides a solid foundation for the all-metal arm, which easily mounts on the back of the monitor and secures it. Many monitors I have previously used in the past require mounting the arm on the base with screws, which is not as stable and secure as a single-unit stand. If you prefer to mount the monitor on a VESA-compatible stand, you can buy a 100 x 100mm VESA mounting kit separately.

Once you get the monitor connected to the stand, you will realize how enormous this monitor really is. At around 15 kg of total weight and a total depth of 93mm, it surely requires some muscle to move it around and plenty of desk space to fit.

ASUS engineers certainly pushed for clean aesthetics, as well as rather aggressive branding of the monitor. Throughout the monitor you will find “ASUS” and “ProArt” labels.

Right out of the box, you will also find the removable “ProArt Display” sticker that shows the highlights of the monitor features, including 120Hz refresh rate, 10-bit capability, Color Accuracy of Delta less than 1, Dolby Vision, etc:

ASUS ProArt PA32UCG Monitor Labels

Connecting the monitor is a breeze, and the ASUS ProArt PA32UCG provides plenty of connectivity options, as well as a built-in 3 port USB hub that you can uplink with a USB Type-C cable:

ASUS ProArt PA32UCG Monitor Connections

I connected my PC and my Mac using the Thunderbolt 3 interface, which worked really well and my computers recognized it without any issues.

As usual, ASUS does a great job in making their products easy to set up. Once you get all the cables hooked up, and turn on the power switch located right next to the power cable input, all you have to do is power it up using the power button on the back. I found this to be a bit strange, as I am not sure why this monitor needs two separate locations to turn power off from. Not a big issue, since you will probably never touch the power switch after hooking up the monitor initially.

Overall, the unboxing experience, as well as the physical setup of the monitor was great. The build quality of the monitor is certainly superb as well, something one would expect from any high-end product.

Monitor Hood

Unfortunately, ASUS provides a rather cheap-looking hood made out of rubber. It feels sturdy, although I can’t say anything more positive about it, especially when it comes to practical use. First of all, ASUS did not think about ongoing screen calibration with the hood. Unlike other brand hoods I have seen in the past (check out the BenQ SW320), there is no sliding gap on the top of the hood in order to hang the provided X-Rite colorimeter. The only way to calibrate the screen is to take off the hood, calibrate the screen and then put it back on.

Second, since the hood is not magnetic and has to be attached using provided pins, one would have to remove all the pins one by one, then repeat the process of attaching them after the hood is in place. This is a huge waste of time. Not sure why ASUS engineers didn’t think about this when designing the monitor.

Here is the monitor, once it is fully set up with a hood:

ASUS ProArt PA32UCG Monitor
ASUS ProArt PA32UCG Fully Assembled

Monitor Setup, Buttons and Viewing Angles

If you need to make any adjustments to the monitor height, all you have to do is physically push the monitor up and down and it adjusts very easily, then stays in place. You can tilt it between +23 and -5 degrees, and the monitor can swivel up to 60° in either direction to accommodate most viewing angles and positions. The monitor can also be pivoted sideways up to full 90° if you prefer to use it in vertical orientation and you can do it in both directions depending on which side you want the buttons and the cabling.

As for the viewing angles, the monitor provides up to 178° horizontal and vertical viewing, which is great. However, there is one thing I noticed about the monitor worth mentioning. The matte coating of the monitor seems rather thick, which creates a small problem when viewing the edges of the screen from the center – they start to appear noticeably darker. So if you are looking at a pure white image, you will notice some strange vignetting in the extreme corners. If you move further away from the screen to normal viewing distance, the effect is minimized, so it is only really a problem if you want to see details up close.

The on-screen display (OSD) is easy to use, providing plenty of options for fine-tuning the monitor output, as well as changing monitor settings:

ASUS ProArt PA32UCG OSD

However, I very much dislike the button layout of this monitor – all buttons are located on the back, making it hard to navigate the menu. I don’t know why ASUS couldn’t put the buttons on the front or the side of the monitor, as on some other models. This is especially problematic for those who are starting out with the monitor, or have it mounted on their walls – good luck accessing those buttons! My only practical way to navigate the menu was to learn what the different buttons do by feel, as I could not turn the monitor in my direction every time I needed to make a change. This is a huge user-experience and design oversight in my opinion, as there is no other way to access the menu.

Installing Monitor Driver

The next step was to install the monitor driver on my PC (driver is not needed for macOS), which can be downloaded from ASUS website. It was a very quick process, and the monitor was identified properly immediately, giving me all the options for different resolutions and refresh rates.

The process was even smoother on my iMac Pro – I simply connected the monitor with the provided Thunderbolt cable and it was immediately recognized as a secondary monitor. At the time of writing the review, the monitor was tested and calibrated on macOS Big Sur v11.6, which worked well without any issues.

However, there are a few things you might want to look into when it comes to monitor settings. The default configuration of the PA32UCG is set to reduce the power consumption of the monitor, which can be a problem – my computer refused to recognize the monitor after it would wake up from sleep. To get around this issue, I had to navigate to System Setup -> PowerSaving and set it to “Normal Level” (it was set to “Deep Level” on mine).

When connecting my PC through the DisplayPort, I was also initially not getting the advertised refresh rates, so I had to go to System Setup -> DisplayPort Stream and change it to “DisplayPort 1.4 DSC”. After that, I had no problems with the monitor in either setup.

120Hz Refresh Rate

The 120Hz refresh rate is amazing, making the screen great for editing video content, playing games, and watching movies. However, one has to have the right kind of cable that can support 120Hz bandwidth in order to take advantage of it. When I tried to use my older DisplayPort cable that I previously used with an older monitor, I got a bunch of weird color artifacts on my screen when I tried to push 120Hz. So I had to swap out the cable for a higher-grade one to avoid these issues. Make sure you use the provided cables that came with the monitor instead of your old wiring, as it might not be good enough.

Dead Pixels and Tinting

Most basic and enthusiast-grade monitors often have issues with dead pixels, uniformity and tinting of colors, so I wanted to see if I could detect any issues with the naked eye. I went ahead and fired up a white document and I scanned the surface of the screen for any potential issues, especially when it comes to color uniformity. Everything looked great and the whole screen looked pretty uniform to me. Still, I decided to let the monitor warm up for more time and run a uniformity test in DisplayCAL, which I provide further down below in this review.

Factory Calibration Accuracy

The first real test was to see how accurate the monitor is straight out of the factory. After making sure that the monitor stayed on for more than 30 minutes, I went ahead and fired up DisplayCAL and performed a few verification tests using both sRGB and AdobeRGB. Take a look at the following result with sRGB:

PA32UCG Factory sRGB

As you can see, the accuracy of the factory calibration is excellent. The monitor scored 0.69 in average Delta for colors, which is in line with ASUS’ promise to deliver Delta accuracy below 1. Maximum Delta for different shades of gray were great except for one patch #4, which was at 2.01. I re-ran the test several times and managed to get a lower score, especially as the monitor warmed up more.

Next, I changed the preset to AdobeRGB in order to measure its factory calibration accuracy:

PA32UCG AdobeRGB Factory

Once again, these are excellent results. Everything measured well below Delta 1, and the maximum Delta also stayed in a much safer zone with the monitor now fully warmed up.

Unfortunately, I was not able to test the factory calibration accuracy of other color profiles. DCI-P3 was way out of whack when it comes to target whitepoint, and while the color accuracy looked pretty decent at around 1-1.3 Delta, Maximum Delta often exceeded 3.5, which does not seem right. I tried to measure Rec709 and that one was even worse, so after many different tries, correction profiles and different DisplayCAL settings, I gave up. Sadly, I couldn’t even calibrate the monitor in DisplayCAL with these display profiles either. While the provided “ASUS ProArt Calibration” tool (see below) seemed to show excellent calibration results for each color gamut, that was certainly not something I could measure with DisplayCAL.

I personally don’t work in DCI-P3 or Rec709 color spaces for my photography needs, but if you do, you might want to look into these in more detail and see how you can verify the end results.

ASUS ProArt Calibration Software

The PA32UCG comes with ASUS-branded tool to calibrate the screen. Since the ASUS PA32UCG has a hardware LUT, the software is specifically designed to calibrate the monitor hardware. Unfortunately, software is one area that always creates problems for most monitor manufacturers. Those who have used Dell monitors know how problematic DUCCS (Dell’s calibration tool) can be, and the type of havoc it created with different updates. The same goes for BenQ’s calibration software, which also has a boatload of issues. In short, most manufacturers who choose to write their own software end up with generally poor results.

How does the ASUS ProArt Calibration software compare? If you don’t count the fact that the software is not yet compatible with macOS (the “Driver & Tools” section of the website only has links to the PC version), I would say that my general impression so far has been quite good. For sure better than what I experienced with BenQ or Dell. The software interface is very simple and intuitive to use, and I have not seen it crash once after using it for many weeks while I was testing the monitor. Take a look at the screenshot of the software:

ASUS ProArt Calibration Software

All you have to do is pick the Color Calibration target (and you can select as many as you would like), then click “Start Calibration”, which guides you through the initial three-step process: Set up monitor, Connect Calibrator and Measure Brightness. Once those three steps are done, the software by default will wait for 30 minutes before calibration can be started (to warm up the monitor). However, you can override that and start the calibration earlier.

Once calibration is done and the target data is written into the LUT, the monitor automatically reboots to apply the changes.

That’s all there is to it, really. While you can adjust some of the calibration settings, change between different calibration results and set up calibration reminders, you don’t have to do any of that and just go with the defaults, which work really well out-of-the-box. If you want to customize your brightness level and calibrate uniformity, you have to go to the “Customize Target” area of the software and change your settings.

The nice thing about the software, is that once you are done calibrating the monitor, you can save calibration results into a Reports folder, where everything is stored in high-quality PNG format. Here is the first page of sRGB calibration results:

ASUS ProArt Calibration sRGB Report

It is a pretty simple report, showing that my average delta was 0.39, in-line with what I have previously seen when verifying it with DisplayCAL. If you want to see more detailed data, check out the second page of the report:

ASUS ProArt Calibration sRGB Report 2

Here, we can see the individual color patches and their measured Delta after calibration. The software did a great job with all color profiles I used, including DCI-P3 (measured 0.95 average Delta, with some greens reds and yellows in the orange zone) and Rec.709 (measured 0.43 average Delta, all in the green zone below 1.5). When calibrating the native gamut (Standard), calibration results stayed below 0.30 average Delta, which is very impressive.

Overall, I did not find any issues with the software, and I really liked the simplicity of the software. I hope ASUS keeps it this way and puts equal weight on compatibility as well. It was a bummer that I could not do any of this from my Mac, and I hope to see the Mac version of the calibration tool sooner than later.

DisplayCAL Verification Post Calibration

Personally, I don’t really trust manufacturer-provided software for calibration verification, since there are too many variables involved, and the size of the target calibration when it comes to color patches could be too small. Naturally, my next step was to fire up DisplayCAL and see how well the ASUS software actually calibrates the monitor.

Interestingly, when verifying factory calibration, the correction profile that provided the most accurate results was “GB-r-LED IPS (Dell U2413)”. However, the best profile after calibrating the monitor was “RGB LED family (HP, SOYO)”, which is what I ended up using for the rest of the tests and calibration. After inquiring about this in different forums, that’s the monitor correction I was instructed to use with the PA32UCG, and it worked out well for both sRGB and AdobeRGB. Here is the sRGB verification result:

PA32UCG sRGB After Calibration

This is an even better result compared to factory calibration, showing excellent performance below 0.5 average Delta!

Here is the same result for AdobeRGB:

PA32UCG AdobeRGB After Calibration

Once again, these are pretty good results, definitely in-line with what one would expect from a high-end monitor.

Evaluation of Display Uniformity

Being able to accurately display colors while retaining both color and light uniformity throughout the screen is not an easy task, and most consumer-grade monitors fail, especially at the latter. Before I talk about the uniformity compensation features of the monitor, I wanted to see the uniformity of the monitor straight out of the box. Let’s take a look:

PA32UCG Uniformity Factory

Although this is not a bad result, we can see that the top left corner of the monitor is definitely darker when compared to the rest of the screen, and it failed the tolerance test at 100% (120 cd/m2). The right side of the screen is clearly much better, so uniformity compensation must be employed, if you are looking for more even illumination.

While you can turn on the “Uniformity Compensation” feature in the monitor setup to mitigate the issue, it is not an ideal choice, since it lowers the overall brightness (mine went down from 120 cd/m2 to 103 cd/m2) and does not always do a good job.

Custom Calibration with Uniformity Correction

Being a professional-grade monitor, the ASUS ProArt PA32UCG offers a number of pro-level features that you only see on high-end monitors, including two levels of uniformity compensation. The nice thing about the PA32UCG and the software that comes with it, is that it offers uniformity compensation as part of the calibration process and the monitor is able to make hardware adjustments to uniformity if you pick the correct option in the “Customize Target” menu.

As you go through the Uniformity options, you will see that you can pick between two grids: 3×3 and 5×5. For a more accurate result, I went ahead with the 5×5 grid.

During the calibration process, you will be asked to place the colorimeter in different parts of the screen twice. The first time you will see RGB colors flash for tinting uniformity, and the second time you will only see a shade of gray flash once for illumination uniformity. Once it is done, your monitor should be uniform both in tint and brightness throughout its surface.

Here is the calibration result of the uniformity, from the provided report:

PA32UCG Uniformity After Calibration

Wow. That’s a pretty incredible result, demonstrating that the uniformity compensation feature of the monitor does its job at making sure that the monitor stays fully uniform, edge to edge. DisplayCAL was very happy with the results, showing “Recommended tolerance passed” in every cell.

And here is the modified report from the ASUS software:

PA32UCG Calibration Results with Uniformity

Average Delta is still below 0.4, and the brightness uniformity is pretty close to 100% across the board. That’s just excellent.

Here is how DisplayCAL measured the accuracy of the monitor after hardware calibration with uniformity compensation:

PA32UCG sRGB After Calibration

At this point, there is not even a need to software-calibrate using DisplayCAL. I tried it out, and I could not get anything noticeably better!

Native Gamut Coverage

If you don’t need to stick to a particular color gamut like sRGB or AdobeRGB, I would recommend going with the “Standard” preset that ASUS uses by default. This is the monitor’s native color gamut, which is obviously wider than both sRGB and AdobeRGB. How much wider? Let’s take a look at the evaluation results from DisplayCAL that show its gamut coverage:

DisplayCAL Native Color Gamut Coverage

Here is the profile information:

DisplayCAL Native Color Gamut

And lastly, final calibration verification using the native gamut of the display:

ASUS PA32UCG Native Gamut DisplayCAL

Once again, this is a very impressive result – the average Delta measured below 0.3, while the maximum stayed below 1.5. This was my final configuration for the monitor, and the one I would recommend to keep for all your photo and video editing needs.

Summary

Without a doubt, the ASUS ProArt PA320UCG deserves high praises for its overall accuracy and performance. As you can see from this review, this monitor showed exceptionally good results. Its factory calibration is spot-on, the uniformity compensation does its job at keeping every part of the monitor uniformly bright, its calibration potential is superb, and the software works surprisingly well without any serious bugs and issues. It is one of the best monitors I have tested to date, and if you take into account all the features it has to offer when compared to the competition, it is arguably the most feature-rich monitor on the market today.

When it comes to monitors, you almost always get what you pay for. Over the years, I have tried out many types of monitors – from budget-friendly consumer models, to high-end NEC and EIZO monitors, and one thing has been very consistent: budget-friendly options always come with their share of issues. While most beginner photographers and videographers are not going to care about color accuracy, often opting for cheap monitors, seasoned commercial photographers know how critical color accuracy and uniformity are. As a result, they often go for either professional, or reference-grade monitors that can cost tens of thousands of dollars.

The ASUS ProArt PA320UCG falls right below reference-grade monitors, and it competes directly with the pro-lines of EIZO and NEC. That’s a tough market to compete in, given the extensive experience of these companies in this space. The good news is, the PA320UCG surely does not disappoint – ASUS engineers set themselves on a mission to make compelling products for creatives with their new ProArt line, and I would say that they have succeeded.

At the same time, there is definitely some room for improvement. While the PA320UCG is a solid offering and a monitor I would not hesitate to recommend to our readers, it is far from being perfect. As I have pointed out in this review, I very much dislike the ergonomics of the monitor, particularly the button placement for navigating the menu. ASUS should find a way to move these buttons to the front of the monitor! Another issue is the poorly designed hood, which must be taken down in order to calibrate the screen. It would be acceptable if the monitor came with a built-in colorimeter, but certainly not in this case. Although these are not critical issues, they should still be addressed in future designs in my opinion.

Overall, the PA320UCG is an excellent monitor. While its price is quite steep at $5K MSRP, its performance and accuracy are certainly commendable. If you are a professional photographer or a videographer and you are looking for a 32″ screen for your work, you should definitely check it out.

For more information about this monitor, please see the ASUS ProArt PA320UCG page on Asus.com.

Where to Buy

If you are interested in this monitor and would like to purchase it for your needs, please consider buying it from our affiliate links below in order to support our efforts.

ASUS ProArt PA32UCG
  • Features
  • Build Quality
  • Size and Weight
  • Packaging and Manual
  • Ease of Use
  • Color Accuracy
  • Color and Brightness Uniformity
  • Factory Calibration Accuracy
  • Value

Photography Life Overall Rating

Photograhy Life Gold Award

Leave a Reply

Your email address will not be published. Required fields are marked *