How you can Capture Motion Blur in Photography (6 Tips)

How to Capture Movement Blur in Photography (6 Tips)

capture motion blur in photography

Are you searching to capture motion blur in your photography?

While photographing motion blur might seem difficult, it’s in fact pretty easy; with a bit of camera know-how, you’ll become taking stunning photos just like a pro.

capture motion blur photography

And that’s what this short article is all about: giving you the tools and techniques you need to get lovely results!

Note that motion blur can look good in any photography genre, so don’t try to limit yourself. Instead, embrace the power of the blur!

1 ) Slow down your shutter quickness

Here’s the fundamental motion blur tip:

Use a slow shutter rate .

You observe, the reason for motion blur is actually that your camera’s shutter remains open for a significant period of time. In other words: you get motion blur when your shutter speed will be long, whereas you freeze the action when your shutter speed is short.

So the number one tip just for capturing movement is to select a longer shutter speed.

motion blur in front of buildings

If your shutter speed is too fast (e. g., 1/4000s), you’re never going to capture much movement. In case you dial in a lengthy shutter speed (e. gary the gadget guy., five seconds) you will not need your subject to move much at all before you start to find out blur.

How long should your shutter speed be? Here, the speed of your subject comes into play. A moving snail and a moving racecar will give you very different results at the same shutter speed. The slower your own subject, the slower the particular shutter speed needs to be to generate blur.

The other factor that comes into play when determining shutter speed can be how much light exists in the scene. A longer shutter rate lets more light into the camera and runs the chance of blowing out or overexposing your image. Below, we’ll cover some ways to permit less light in (so you can use long shutter rates of speed without overexposure concerns).

Bottom line:

There’s no one-size-fits-all shutter speed for motion blur. It’ll depend on the speed of your subject, the brightness from the scene, and how much motion blur you want to capture. The important thing is to experiment!

2 . Stabilize your camera

There are two ways to get a feeling of motion in your images:

  1. Have your issue move.
  2. Possess your camera move.

But for the type of photo we’re after nowadays, it’ll be the subject that is moving. In such cases, you need to do all you can to keep your digital camera perfectly still. Otherwise, you’ll capture a blurry subject matter – but you’ll also end up with a blurry history.

How do you strengthen your camera?

boats in the water

A tripod is ideal, but you can also place your own camera on some other regular object (e. g., a table or a bench). I’d recommend using a remote shutter release or even a self-timer mechanism ; that way, you can trigger the shutter without touching your digital camera (because the more you touch your camera, the more likely it really is that you’ll introduce blur).

3. Consider Shutter Priority mode

As you know, the shutter speed is crucial to attaining a beautiful blurred look. Also small changes will have a big impact upon your shot – so you should use a camera mode that gives you full control over your camera’s shutter.

You have two options. First, you can change your camera to full Manual setting . It’ll work well, plus it’s a good idea for more skilled photographers – but in Regular mode, you’ll also need to choose your aperture and ISO (and you’ll need to make sure that this shutter speed, aperture, plus ISO interact to create an ideal exposure). So if you don’t however feel confident working in Guide mode, you have another option:

Shutter Priority mode .

With Shutter Priority, a person set the particular shutter speed (and the ISO, if you so choose), but your camera will established the aperture to ensure the shot is well exposed. It’s a very handy mode designed for motion blur photography since it ensures you get the movement effect you’re after while also capturing generally well-exposed images.

motorcyclist motion blur photography

How to compensate for long shutter speeds when there is too much gentle

Remember the things i said about a long shutter speed?

The longer the speed, the more light that will get into your camera, and the brighter your pictures will be.

So unless you compensate for this, whenever you try to capture movement blur, you’ll end up with overexposed shots.

Beneath, I’ll suggest three simple methods for preventing this overexposure.

(Note: A fourth method is to merely wait for the light to change – i. e., for it to obtain darker. Many shots that incorporate blur are taken at night or at dawn/dusk for this reason. )

1 . Use a small aperture

Here’s the very first, and simplest, method of avoiding overexposure:

Filter the aperture.

Because the narrower the particular aperture, the less light that will hit the digital camera sensor.

If you’re shooting in Shutter Priority, your camera will actually narrow the aperture for you. As soon as it detects a slow shutter acceleration, it’ll close down the aperture and deliver a well-exposed shot.

When you’re shooting in Manual mode or Aperture Concern, the aperture can generally be changed via a dial on your camera.

One thing to bear in mind:

Adjusting the aperture will not just affect your photo’s exposure. Aperture also impacts the depth of field , which refers to the amount of the scene that’s sharpened. A wide aperture creates a limited depth of field, such as this:

watch with spinning hands capture motion blur photography

Whereas a narrow aperture ensures the entire scene is sharpened throughout:

capture motion blur photography car driving

So while it’s simple to combine a deep level of field with a well-exposed motion blur image, dealing with a shallow depth associated with field while also ensuring well-exposed motion blur can be tough. If you’re after a shallow depth of field impact, you’ll need to counteract overexposure another way, as I explain in the next section:

second . Decrease your ISO

If you’ve tried narrowing your aperture and still aren’t getting you the results you need, or even if you’re after a shallow depth of field, here’s an alternative solution method for preventing overexposure:

Drop your ISO.

ISO has an effect on the sensitivity of your digital camera’s sensor to light, where a higher number will induce higher sensitivity (and therefore a brighter exposure) and a lower number will induce less sensitivity (and therefore a darker exposure).

train moving fast with platform

You can adjust your ISO in Manual mode or even Shutter Priority mode, therefore simply dial in a low ISO (such as 100) and watch as your exposure reduces. Of course , there’s a restrict to how low you can drop your ISO; when you get to ISO 100 or ISO 50, your digital camera won’t allow you to go any more. But it’s always really worth checking whether a lower INTERNATIONALE ORGANISATION FÜR STANDARDISIERUNG is an option because it is a simple way to prevent overexposure.

3. Try a neutral density filter

Say you’re after a motion blur photo, but you just can’t get the exposure black enough. You’ve narrowed the particular aperture, you’ve dropped the particular ISO, but your shots keep coming out overexposed.

You still have another, more dedicated option:

A neutral density filter . It’s a piece of glass that prevents light from passing through your lens – sort of want sunglasses – and enables you to use a lengthy shutter velocity while preventing overexposure.

For example , should you be shooting a seascape in bright sunlight and you wish to blur the water, you’ll end up getting a blown-out, overexposed picture – even with a limit aperture and low ISO. But pop a neutral density filter over your own lens, and you can slow the particular shutter speed right down while keeping a perfect exposure.

long exposure seascape blur

(By the way, a polarizing filter can have a comparable effect, though it’ll furthermore impact the look of your images by cutting out reflections. )

Note that natural density filters come in many strengths. You can get a basic, refined ND filter, one that’ll slightly darken the picture. Or you can buy an ultra-powerful, 10-stop ND filter, which will allow you to dramatically lengthen your shutter speed in vivid sunlight.

A fast note: two more creative techniques to try

If you want to capture images with motion blur but you are looking to come away along with uniquely artistic results, listed here are two other techniques to think about:

  • Slow sync flash . This lets you capture a relatively sharp subject while developing a moving, blurry background, and it’s a great way to create in-your-face shots.
  • Panning . Here, you just follow a moving subject along with your camera; the subject will usually come out nice and sharp, while the background stretches and blurs.

panning with motorcycle

Motion blur in picture taking: conclusion

Well, there you have it! 6 easy tips to capture motion blur in photography.

So remember these guidelines. And the next time you’re right after some creative motion blur photos, you’ll get spectacular results!

Today over to you:

Have you tried taking motion blur photos? Made it happen go well? Do you have any kind of tricks or tips? Talk about your thoughts (and images! ) in the comments below!

capture motion blur photography racecar

Read more from our Tips & Tutorials category

Leave a Reply

Your email address will not be published. Required fields are marked *